What are the steps to apply ceramic coating to our car?
What are the steps to apply ceramic coating to our car?-ALCD
If you want to apply ceramic coating to your car, you will need to make sure that you follow the steps outlined below. Ceramic coatings can provide great protection and help keep your car looking shiny and new for years.
Step 1: Wash and Prepare Your Car
The first step is to thoroughly wash and clean your car before applying any kind of coating. Use a good quality soap specifically designed for washing cars. After washing, use a clay bar to remove all surface contaminants from the body. This will ensure that the ceramic coating has a clean surface to adhere to.
Step 2: Polish Your Car
Once your car is cleaned, you should polish the entire vehicle’s body. This will remove light scratches and swirl marks of your car. This way your car paint will look shiny and scratch free before the ceramic coating application.
Step 3: Clean With Isopropyl Alcohol
Before applying the ceramic coating, it is important to thoroughly clean the surface with an isopropyl alcohol cleaner. This helps ensure that there are no contaminants left on the surface which could prevent proper adhesion of the ceramic coating later on. Make sure that all residue is removed before moving on to the next step.
Step 4: Apply The Ceramic Coating
After properly cleaning and prepping your car's exterior, you are now ready to apply the ceramic coating itself. Begin by shaking the bottle vigorously in order to mix all components properly. Once this is done, use an applicator pad (or microfiber cloth) to spread out an even layer of ceramic coating onto each section of your car’s exterior. Take your time during this process so as not to miss any spots or create runs in your work. Let the product sit for about 5-10 minutes before buffing off with a microfiber towel until a smooth finish appears across all sections of your vehicle's exterior.
Step 5: Let Cure & Enjoy The Benefits!
Allow at least 24 hours before exposing your freshly-coated car’s exterior surfaces to any form of water contact or pressure washing—the chemical reaction needs some time in order for it cure fully! You should also note that frequent top ups are recommended every 12 months in order to maintain optimal results from the ceramic coating system over time—now enjoy!